Brass
Battery Terminals Connectors
We manufacture following "Electric components"
: Plunger, Hex plunger , V-type plunger for Brass Holder,
U-type Brass Plunger for Porcelain Holder, Brass Ring for
Backlite Holder, Hex Ceiling Rose, Male-Female Pin Socket,
5Amp. 2-pin/3-pin set (Solid or Hollow), 15 Amp. 2-pin,3-pin
Socket, D.P. Switch Contact, Brass Connector Contact, Jack
Pin, T.V. Male Female Pin, Brass Reducer, Brass Wood Nipple,
Dum-Nut, Meter Screw Parallel Adapter, Brass Adapter, Brass
Neutral Link-Screws (As per customer's Specification), 'U'
& 'L' type contact, Brass Saddles, Brass Male Female Bushes,
'Brass Cable Glands' etc. Moreover, we can supply any type
of component as per customer specifications, in addition to
our standard designed products.
Copper Battery Connectors Brass Battery Connectors Brass Battery
Terminals Copper Battery Terminals
BATTERY Copper Battery Connectors Brass Battery Connectors
Brass Battery Terminals Copper Battery Terminals TERMINALS
COPPER BRASS BATTERY TERMINALS
.
|
Brass Battery Terminals Copper Battery terminals Battery Connectors
are available in many different designs but in general there
are only main three types which are - LUCAS , ANGLE &
STRIP.
In which Lucas is available in three sizes, 9.5mm,11mm &
13mm. Top three figures are of Lucas type.
We have also developed some special designs made by "FORGING"
on the demand of our customer.
We are capable of designing any type of Terminals
through Forging or any other process, though it is too difficult.
|
